10KV outdoor cold shrink terminal

Classification of the genus:
1-35KV Cold Shrinkable Cable t
Click times:
Release date：2018-04-26
Online inquiry

Detailed introduction

Cold shrinkable cable accessories are liquid silicone rubber injection molding in the factory vulcanization molding, and then expanded, lined with plastic spiral support components of various cable accessories, on-site installation, these pre-expansion pieces in the processing of the cable End or joint, out of the internal support of the plastic support bar, press the cable insulation on the composition of the cable accessories. Because it is at room temperature by elastic retraction force, rather than like heat shrinkable cable accessories to use heat to shrink, so commonly known as cold shrink cable accessories.

SuzhouFeibo 10KV outdoor silicone rubber cable cold shrink terminal

8.7/15 KV cold shrink termination and middle joints testing reports
Test item	Standard requirement	Result	Note
Working frequency voltage test	39kV，5min no flashover, no breakout	39kV，5min no flashover and no breakout of the sample	standard
Partial discharge testing(normal temperature)	the discharge less than 10pC under 15kV	under the 15kv, the discharge of each sample is 3pc	standard
impulse voltage test(90-95℃)	heating the conductor to 90-100℃, 105kV, positive and negative for 10 times, no flashover, no breakout	heating the conductor to 90-100℃, 95kv, positive and negative for 10 times，combination of sample testing without flashover and breakout	standard
Load cycle test	heating the conductor to 90-100℃ under 23kv voltage, for 3 times load cycle test, combination of sample testing without flashover and breakout	heating the conductor to 90-100℃ under 23kv voltag, for three load cycle test, no flashover and breakout	standard
Impulse voltage test(90-95℃)	heating the conductor to (90-100℃,the discharge is less than 10pc under 15KV	under 105kv, positive and negative for 10 times, combination of sample testing without flashover and breakout	standard
Partial discharge testing	the discharge less than 10pC under 15kV	under the 15kv, the discharge is less then 3pc for each sample	standard

Specification

10kv three core heat shrink termination specification sheet
Name		Type	Cross-section area mm2
10kV three core	indoor termination	NLS-10/3.1	25-50mm2
		NLS-10/3.2	70-120 mm2
		NLS-10/3.3	150-240 mm2
		NLS-10/3.4	300-400 mm2
	outdoor termination	WLS-10/3.1	25-50mm2
		WLS-10/3.2	70-120 mm2
		WLS-10/3.3	150-240 mm2
		WLS-10/3.4	300-400 mm2
	middle joints	JLS-10/3.1	25-50 mm2
		JLS-10/3.2	70-120 mm2
		JLS-10/3.3	150-240 mm2
		JLS-10/3.4	300-400 mm2

1, widely used in low-voltage cable terminal processing;

2, to maintain a constant tightening force, with the cable with the breath, to ensure excellent interface characteristics.

3, advanced production technology, vacuum high pressure injection vulcanization molding. Internal structure perfect, no defects, in the 21KV below the Council put less than 1pc (8.7 / 15KV series).

4, without fire and special tools, and no gradually into the trouble, just gently extract the core rope, it will rely on their own elastic retraction, which closely close to the cable, each specification can be applied to a variety of cable Diameter, cable diameter compatibility.
5, the use of imported liquid silicone rubber to ensure excellent insulation and high flexibility, the installation of the cable body has always been to maintain a constant radial pressure, local discharge is small, with the cable body with the "breathing."

6, the terminal body with the cold shrink branch finger sets, cold shrink insulation tube and cold shrink terminal seal tube; intermediate connector with three waterproof sealing process to ensure that the annex excellent sealing moisture resistance.
7, the installation is simple, the operation of the technical dependence is low, easy to master. Cable pretreatment, the stripping distance is short, the installation space needs small. Grounding method using constant force spring fixed ground, no welding or copper tied line, more efficient, safe and reliable.
8, anti-pollution, anti-aging, good hydrophobicity, with excellent corrosion resistance, cold resistance and anti-ultraviolet, to ensure long-term use of stable performance. Especially for high altitude areas, cold areas, wet areas, salt fog areas and heavily polluted areas.

SUZHOU FEIBO HEAT & COLD SHRINKABLE PRODUCTS CO.,LTD.

Suzhou FeiBo heat shrink products Ltd is Jiangsu provincial high-tech enterprise, the company has strong technical strength, with a number of excellent material formulation and process development research professionals, and equipped with advanced production testing, process control and full range of facilities, has become one of the leading material manufacturers.

Main products: Heat Shrinkable Tube, Heat Shrinkable Cable Accessories,Cable Intermediate Connection,Etc.

Contacts:Miss Ren
Mobi:+86 13013866728
Tele:0086-0512-63339531
Fax: 0086-0512-63206968
Skype:+8613013866728
Web:www.fblrs.com
Address:No. 2848,Jinxin Road,Jinjiaba Town, Wujiang District of Suzhou City,Jiangsu Province, China.